What should I do with this gun??

[Fenix031882]

I got this gun in a box of mystery, and Im trying to determine what I want to do with it.  I dont think I want to throw a lipo battery in it (they make me nervous) but my 8.4v batteries just dont do it justice.  I haven't had it chrono'd yet (it came with a chrono report that said 342 over 15 rounds) so it should be cqb legal.  Can anyone look at its specs and tell me if its even worth keeping, Im actually considering selling/trading it for a good pistol, I REALLY!!!! want a nice gbb pistol, and I think this gun might just give me the leverage I need.

Thank you all for your input

David "Fenix" Edwards

[Joe]

Pics?  Description?  Specs?

[chuckysknife3]

I wish you luck in finding an answer. If you really want a nice pistol, go for a pistol! (Personal opinion:two awsome words when it comes to nice pistols. Tokyo marui!)

[Fenix031882]

External Features:
Light weight Nylon ABS Receiver w/ "Special Forces" Logo.
Full Automatic Select Fire.
Flip Open Mock Dust Cover simulating real M4. (Pulling the charging handle will open the real dust cover and flip open the mock if it was closed.) Mock dust cover is designed to stay open most of the time simulating real AR.
Flat top weaver receiver ready for any scopes and optics.
Full Metal Convertible Barrel.
Full Metal Front & Rear Sight.
Ready for any RIS / Conversion Kits.
6 Position Retractable LE Stock.
Metal convertible outer barrel (could be sealed tight for importation purpose)
Adjustable Hopup.
Detachable Carrying Handle.

Internal Features:
Li-Poly Ready (for experienced players).
High ROF feeding for Lipoly (Tested with 11.1V 1350 mah)
High Speed Piston with Metal Teeth.
"Matrix" Fully Upgradable Super Gearbox with superb Air Seal.
Steel RPM Gear sets.
Steel 8mm Metal Bushing Gearbox.
Torque up Motor.

6.04mm tight bore barrel: Installed.
Torque Up Motor: Installed.
- Railed upper receiver with detachable carrying handle.
- Adjustable Hopup.

Dimension: 770mm / 850mm
Weight: 2400g
Inner Barrel: 363mm / 6.04mm tight bore.
Magazine Capacity: 360 Round AIM Top metal hi-cap included. (Use all M4/M16 series AEG Magazine).
Best Mags: Hi-CAP: JG, Matrix and compatible. Mid-CAP: MAG.
Muzzle Velocity: 320~350 FPS
Thread Direction: 14mm negative.
Gearbox: 8mm Full Customizable Matrix Ver.2 AEG Gearbox.
Motor: Long Type
Fire Modes: Full / Semi / Safety select fire.
Manufacture: AIM (Taiwan) Matrix (USA)
Package Includes: AEG, Magazine, Manual.
Battery: Small type / Nun-Chuck. Not Included. Recommend a 9.6V 2300mah nun chuck for best performance.
Hopup: Adjustable Hopup.

Ok so here we go again.  I like all input (I even get a chuckle out of hate fueled mouth diarrhea)

[ShootEmUp]

Seems worth keeping to me but if there is something you want more, sell it and buy a pistol.

[Shifty]

I wish you luck in finding an answer. If you really want a nice pistol, go for a pistol! (Personal opinion:two awsome words when it comes to nice pistols. Tokyo marui!)

I second that!

[Fenix031882]

Ok then let me ask for a different set of opinions.  If I keep this gun how could I best turn it into an amazing cqb gun?  I have seen mods where they removed the buffer tube and installed a extremely short front end but my fear is that might be above my skill level?

All help is appreciated
Thanks
David

[ShootEmUp]

What you can do is buy a CQB length inner and outer barrel and equip those and just change out the spring or clip it, whatever you want to do. If you think that you would like to go this route and don't want to spend the money on having someone do it for you I can make a video of how to do it. It's really not that hard honestly, and if you screw something up, you can always take it to So Go or someone to get it done for you! All you should have to pay for all of those parts I just mentioned would be around $35, not that bad if you ask me.

[keasop]

im in t he process of building a CQB gun just need the pistol grip

[Reverandff7]

Well to be honest man i will that it is easy to clip the spring... the problem i find with cliping the spring is where to clip it. I have already done a few that i have cut to short but that is just cause im a relitivly new at airsmithing... My skill has not yet hit its lvl cap. I mean im still oranage on version 2 gearbox's(lol WoW referance)

[keasop]

i hear that rev

[Metal]

I've owned several of these M4's that you mentioned. Every one I bought I bought for parts because for one reason or another the gun was unsatisfactory. I find the body to be very weak and leads on bad barrel wobble and the motor is rediculously weak. The rest of the parts are actually decent. Unless you have the time/money to throw at it to make it a decent gun, I'd get rid of it in favor or a pistol or something.

[chuckysknife3]

 Reverand, I used to have a WoW addiction...then my subscription ran out...for the 5th time...

[Fenix031882]

I've owned several of these M4's that you mentioned. Every one I bought I bought for parts because for one reason or another the gun was unsatisfactory. I find the body to be very weak and leads on bad barrel wobble and the motor is rediculously weak. The rest of the parts are actually decent. Unless you have the time/money to throw at it to make it a decent gun, I'd get rid of it in favor or a pistol or something.

Man just as I start to think that I'd keep the gun and turn it into a cqb project you come along and help me get all doubty again lol

[Joe]

You should be fine for CQB.  The reduced spring strength requires less force to fire.  I do not know if your motor is weak.  Even if it is, the close distances and semiautomatic only rules in CQB may negate that issue.

Go ahead and give it a try.  If you want, So Go can you a new motor pretty cheap and Evan can install.  He'll get your gun purring like a kitten.