Author Topic: Clearing out some odds and ends  (Read 7057 times)

Metal

  • Sr. Member
  • ****
  • Posts: 436
    • View Profile
Clearing out some odds and ends
« on: March 28, 2012, 04:20:11 AM »
I'm making the 100% switch over to Lipo batteries. I've even already sold my smart charger to a friend at work who is just starting out in the hobby, so none of my old NiMh batteries are of any use to me now.


From top to bottom on the batteries there is:

8.4v 1100mah stick battery wired to deans-$8

8.4v 1100mah stick battery wired to deans-$8

9.6v 1600mah Tenergy stick battery wired to small tamya-$12

9.6v 1600man Intellect stick battery wired to deans-$15

10.8v 1500mah stick battery wired to deans-$15

9.6v 5000mah Intellect large type battery wired to deans-$20

9.6v 1600mah Tynergy nunchuck battery wired to deans-$15





Next is my ICS MP5SD. I used this at BO2 to pretty good effect. ROF is great even with an 8.4v small battery. Barrel is polished and sealed with rainx. #14 o-ring on the piston head. AOE is corrected. Gears are re-shimmed. Cylinder head is sealed. Wired to deans. It is currently shooting around 402fps, but with a little use, the new spring will settle in and will bring it down some. No battery and no mags are included. $85 OBO.





This next one really hurts me to post up for sale, but I honestly don't use it that much now that I've gotten really into AK's. I've had this since before my first Invasion (OKIV). It's a G&G M14 SOC16. It is wired to deans, cylider head is sealed, o-ring air nozzle, #14 o-ring on the piston head, AOE corrected, re-shimmed, KWA gearset, polished barrel and sealed with rainx. Last chrono put it at 375fps with .20g's. The scope mount in a G&P and usually goes for $60 by itself. Red dot is unknown but works great and is a 30mm tube. Mount, optic and all goes with it. Including one full metal G&G 470rd hicap magazine. Asking $200 OBO.








Buyer pays shipping. Prices are negotiable, especially on multiple purchases.

netshark993

  • Sr. Member
  • ****
  • Posts: 304
  • Come to the darkside, we have cookie.
    • View Profile
Re: Clearing out some odds and ends
« Reply #1 on: March 28, 2012, 08:21:31 AM »
That its mp5, is it a metal body. Or a plastic one?
P* advocate

Metal

  • Sr. Member
  • ****
  • Posts: 436
    • View Profile
Re: Clearing out some odds and ends
« Reply #2 on: March 28, 2012, 01:48:35 PM »
It's a Sportsline.

netshark993

  • Sr. Member
  • ****
  • Posts: 304
  • Come to the darkside, we have cookie.
    • View Profile
Re: Clearing out some odds and ends
« Reply #3 on: March 28, 2012, 05:21:32 PM »
Nevermind then. Lol.
P* advocate

Metal

  • Sr. Member
  • ****
  • Posts: 436
    • View Profile
Re: Clearing out some odds and ends
« Reply #4 on: March 29, 2012, 03:22:50 AM »
Yeah, I'm not dumb enough to sell an ICS proline MP5 for less than $100. :o

chuckysknife3

  • Guest
Re: Clearing out some odds and ends
« Reply #5 on: March 29, 2012, 07:05:58 AM »
Pm sent.

netshark993

  • Sr. Member
  • ****
  • Posts: 304
  • Come to the darkside, we have cookie.
    • View Profile
Re: Clearing out some odds and ends
« Reply #6 on: March 29, 2012, 07:35:50 AM »
Yeah, I'm not dumb enough to sell an ICS proline MP5 for less than $100. :o
Haha, its not even that. I just want the body. if I were to even get that sportline it would be gutted.
P* advocate

Metal

  • Sr. Member
  • ****
  • Posts: 436
    • View Profile
Re: Clearing out some odds and ends
« Reply #7 on: March 30, 2012, 04:07:51 AM »
The ICS kinda has been gutted. Even down to the wiring.

ALL 9.6v batteries are SOLD.

netshark993

  • Sr. Member
  • ****
  • Posts: 304
  • Come to the darkside, we have cookie.
    • View Profile
Re: Clearing out some odds and ends
« Reply #8 on: March 30, 2012, 07:31:47 AM »
I would want to polarstar it. but i waqnt a metal body.
P* advocate

Metal

  • Sr. Member
  • ****
  • Posts: 436
    • View Profile
Re: Clearing out some odds and ends
« Reply #9 on: March 31, 2012, 07:52:54 PM »
ICS MP5 and G&G M14 are SPF.

Metal

  • Sr. Member
  • ****
  • Posts: 436
    • View Profile
Re: Clearing out some odds and ends
« Reply #10 on: April 13, 2012, 03:11:37 AM »
*ADDING ITEM FOR SALE*


I've decided to sell off my HFC Special Forces M190 (M9). It is the railed version and is select fire. Functions fine in all fire modes. Comes with 2 green gas mags (one may need a new fill valve o-ring) and one CO2 mag. Asking $80 shipped.


*Will trade for HSGI sure-grip padded battle/war belt in Multiglam.*




Also, MP5 and M14 are back up for sale.

porkchop

  • Full Member
  • ***
  • Posts: 112
    • View Profile
Re: Clearing out some odds and ends
« Reply #11 on: April 15, 2012, 01:19:27 PM »
Plastic body or not, that's still a very fair price for an ICS mp5. The motors alone are $50.
"Phase plasma rifle, in a 40 watt range......"

Metal

  • Sr. Member
  • ****
  • Posts: 436
    • View Profile
Re: Clearing out some odds and ends
« Reply #12 on: April 15, 2012, 11:18:57 PM »
G&G M14 and 10.8v stick battery are SOLD.